Using The Appliance; Cleaning The Appliance - DrBrowns natural flow AC178-INTL Instrucciones De Uso

USING THE APPLIANCE

Power
Press the Power Button.
1. 9
Note: When the sterilizer is turned on, the appliance will beep and the
indicator above the power button will light up.
1. Choose the desired function:
10
Automatic Sterilize/Dry
A Press the Automatic Sterilize/Dry Button. The appliance will beep one time and the
sterilization cycle will start.
WARNING: DO NOT open lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. DO NOT
touch hot surfaces, including lid, tray and lower rack, during or
immediately after use.
B When the sterilization cycle is complete, the drying cycle will begin automatically.
The drying cycle lasts approximately 45 mins.
CAUTION: As the unit switches from the sterilization to the
drying cycle, it is expected to see a large initial release of steam
as the fan turns on. Keep a safe distance from the unit while this cycle
is in process.
When the drying cycle is complete, the appliance will beep 5 times and
C
switch off automatically.
Sterilize Only
Press the Sterilize Only Button. The appliance will beep one time and the sterilization
A
cycle will start.
WARNING: DO NOT open lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. DO NOT touch
hot surfaces, including lid, tray and lower rack, during or immediately
after use.
B When the sterilization cycle is complete, the appliance will beep 5 times and
switch off automatically.
Note: This cycle lasts approximately 9 minutes but may vary by the amount of
water you add, the number of items to be sterilized and other environmental factors.
CAUTION: Wait 10 minutes for parts to cool, then open lid carefully
by handle and beware of residual steam.
4
Sterilize Dry Automatic
Only Only Sterilize/Dry
Note: If there is not enough water added, incomplete sterilization may occur. If the unit
was not able to sterilize completely, it will beep and the indicator light will flash for one hour.
If this happens, wait 10 minutes to allow unit to cool, then add water to the solid FILL LINE
of the measuring cup (110 mL), pour the water onto the heating plate and restart the
sterilization cycle.
Dry Only
Press the Dry Only Button. The appliance will beep one time and the drying cycle
A
will start.
B When the drying cycle is complete, the appliance will beep 5 times and
switch off automatically. This cycle lasts approximately 45 minutes.
Note: Any cycle can be stopped at any time by pressing the power button.
CAUTION: If it is necessary to drain water from the base, always
POUR AWAY FROM YOU, as shown by the symbol on base.

CLEANING THE APPLIANCE

CAUTION: Unplug from outlet and allow to cool for 60 minutes before
cleaning. DO NOT IMMERSE IN WATER.
Clean at least once a week when in regular use.
BASE AND HEATING PLATE: Wipe all surfaces with a damp cloth or sponge.
TRAY, LID, LOWER RACK AND MEASURING CUP: Clean in hot, soapy water and rinse
well, or in a dishwasher (top rack only). Allow to air dry.
Note: DO NOT use scouring pads, abrasives, bleach or solvents for cleaning.
DO NOT disassemble base. There are no serviceable parts inside.
5