Repeat Playback - Teac LP-R500 Manual Del Usuario

To check the programmed order
In the stop mode, press the . or / button repeatedly to
show the track numbers that have been stored in memory.
To erase a track, press the CLEAR button when the number is
displayed. After deletion, the next track number will be moved
up.
To add a track to the end of the program
In the stop mode, press the PROGRAM button.
Select a track number by pressing the . or / button, and
then press the PROGRAM button.
The track is added to the end of the program.
To delete the last track from the program
In the stop mode, press the CLEAR button to delete the last
track from the program.
To clear the program
If one of the following buttons is pressed, the programmed
contents will be cleared:
Main unit
OPEN/CLOSE, POWER, FM/AM, PHONO/TAPE/AUX, STOP in the
stop mode
Remote control
FM/AM, PHONO/AUX, STOP in the stop mode

Repeat Playback

Each time the REPEAT button is pressed, the repeat mode is changed
as follows:
REPEAT ALL
REPEAT ALL (Repeat All the Tracks)
Press the REPEAT button once during playback.
All the tracks of the disc will be played repeatedly.
REPEAT 1 (Repeat one track)
Press the REPEAT button twice during playback.
The track being played will be played repeatedly. If you press the
or button and select another track, the track you selected will be
played repeatedly.
It is also possible to select a track to be repeated in the stop
mode. Press the REPEAT button twice and then select the track
number by pressing the or button. Press the PLAY/PAUSE
button (/) to start playback.
If one of the following buttons is pressed, repeat mode will be
cancelled:
Main unit
OPEN/CLOSE, POWER, FM/AM, PHONO/TAPE/AUX
Remote control
FM/AM, PHONO/AUX
Repeat playback works with finalized discs only.
REPEAT 1
(off )
21