ECOVACS WINBOT W1 PRO Manual De Instrucciones página 11

Maintenance
Reservoir
Empty the Reservoir
Pour out the cleaning solution from the Reservoir. After using
ECOVACS WINBOTcleaning solution, please rinse the reservoir with
the provided measuring cup.
OR
Mopping Pad
Replace the Mopping Pad
Remove the dirty Mopping Pad from the WINBOT and place a clean
new one on it. Then, press the Mopping Pad with your hands to
help it stick firmly. Please make sure the Mopping Pad is correctly
attached, and do not cover the Edge Detection Sensors.
* Clean the Velcro at the bottom of WINBOT with a clean brush if it is
dirty. Do not wash with water to avoid damage caused by water.
Wash the Mopping Pad
Remove the Mopping Pad. Wash it with tap water, and wring it dry
before use.
Note: Wash with tap water.
Washing the Mopping Pad regularly can extend its service life.
If the Mopping Pad becomes worn or no longer fits exactly within the fastener
area, replace it with a new one to achieve optimal cleaning performance.
Explore more accessories at ECOVACS HOME App or at
https://www.ecovacs.com/global.
Narrow Side
Wide Side
Wide Side
Narrow Side
11
EN