minutes, 1 second to 90 minutes or 1 minute to 9
hours) to 999 minutes)., or continuous - - -) using
the instruction given above. Then switch the unit
OFF by pressing in the control knob. Wait 5
seconds and switch the unit back ON by pressing
the control knob in. The inputted values are now
saved in the memory. They can be altered at any
time by following the same procedure.
Changing the timer unit
The unit timer is defaulted to minutes only (1
to 9999 minutes). To change to minutes and
hours (1 minute to 9 hours, H is displayed in the
left digit of the timer display), or to change to
seconds and minutes (1 second to 90 minutes)
turn the unit off using the control knob then
switch the mains power off at the plug. Hold
down both the start/stop button and the mode
button whilst simultaneously switching the mains
power back on. The display will temporarily
show 88:88 then OFF. Using the control knob
turn the unit on, the display will show nn:ss for
minutes and seconds, H:nn for hours and
minutes and nn for minutes, turn the control
knob to select the desired timer unit and turn
the unit off by the control knob, OFF will be
displayed. When the unit is next used the timer
will have been altered to the set unit.
Technical specification
Speed
Speed display
Timer
Dimensions (w x d x h)
Weight
Electrical supply
TR-200
Fixed - 20 rpm
None
No
200 x 270 x 240 mm
3.2 Kg
230V / 50Hz, 50W
Maintenance & servicing
WARNING: Ensure the unit is disconnected
from the mains electricity supply before
attempting maintenance or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs and
a service manual, please contact the Technical
Service Department of Antylia Scientific quoting
both the model and serial number.
Only spare parts supplied or specified by Antylia
Scientific or its agents should be used. Fitting of
non-approved parts may affect the performance
and safety features designed into the instrument.
If in any doubt, please contact the Technical
Service Department of Antylia Scientific or the
point of sale.
Antylia Scientific Ltd.
Beacon Road,
Stone, Staffordshire,
ST15 0SA, United Kingdom
Tel: +44 (0)1785 812121
Email: cpservice@antylia.com
Web: www.coleparmer.com
TR-200D
Variable - 2 to 40 rpm
Digital
Yes – up to 999mins
200 x 270 x 240 mm
3.2 Kg
230V / 50Hz, 50W
3