Publicidad
Idiomas disponibles
Idiomas disponibles
EN
30
Step 2: First connect the gas hose (B) by hand to the gas connection (A) of the
appliance. Fasten the connection between A and B securely with a size 13 mm
spanner and another size 17 mm spanner.
Step 3: Refit the heat-resistant plate (C) with 3 screws.
Please note:
•
A certified gas hose (EN 16436-1) and a gas regulator (EN16129) are
included.
•
Worn or damaged hoses must be replaced immediately.
•
The gas appliance may only be put into operation after it has been
connected and a leak test has been carried out!
•
Only use certified spare parts.
•
Replace the old gas hoses with new gas hoses when national regulations
or the service life of the hose require it (recommended: every 2 years).
Publicidad
