Cleaning And Storage Tips; Maintenance - WAGNER POWER ROLLER MAX Manual Del Propietário

Cleaning and storage tips:

• Thoroughly cleaning your unit and its components is the best way to ensure the prolonged life of your unit.
• Keep water, paint, and other residues away from the handle button. A clogged handle button will affect the performance of
your unit.
• Be sure that your unit is free from all fluids before storage. After storing your unit in extreme cold temperatures, allow unit to
reach room temperature before using.
• When storing your unit, be sure the paint hose is stored in a large loop without any kinks. If it is bent, it could be damaged.

Maintenance:

The areas on the roller handle and the extension indicated
below must be cleaned thoroughly and lubricated after each
use. ALL paint should be removed from the areas highlighted
in gray below, especially the quick-release tabs and all other
areas that connect with other parts. This can be done by using
the appropriate cleaning solution and an old toothbrush (do
NOT SUBMERGE ROLLER HANDLE!).
(Extension)
Connecting Quick-
area release
tabs
English
All manuals and user guides at all-guides.com
Storage
(Handle)
Connecting Quick-
area release
tabs
In addition to thoroughly cleaning your unit after every use,
you must clean and lubricate the areas on the arm (a, b, c),
extension (d), and the Quick-clean™ inlet plug O-rings (e)
indicated below. Use a thin layer of petroleum jelly to lubricate
the indicated areas.
IMPORTANT: DO NOT attempt to remove the Quick-
clean™ inlet plug O-rings, and make sure not to lose the
Quick-clean™ inlet washer.
(e)
12
(c)
(a)
(b)
(d)