Identification; Inspection - Storage - Modine CGC Serie Manual Tecnico

3. Identification

3.1 For any communication, request for assistance or spare parts, please provide the model name and serial number shown
on the data plate:

4. Inspection - Storage

4.1 Upon receipt of the model immediately check its state of integrity; immediately dispute with the transport company any
damage. The packaging is created according to the model, to the suitable means of transport and of handling.
4.2 The heat exchangers of the models are supplied with a pre-charge of dry air at 2 bar and have load couplings of 1/4" SAE.
Check for the presence of pressure. In the absence of pressure immediately contact Modine and report the problem on
the transport document. Insufficient pressure indicates a loss due to damage incurred during transportation.
Figure 1
Figure 2
29
www.modine.com