6. DVR Operation
A. Insert the micro SD card into the memory card slot.
Turn off the device before installing a memory card; insert the memory card until it is
locked.
Installing the card:
Turn the micro SD card to the slot as
shown in the picture and insert it until
it clicks.
Removing a card:
Press the card slightly and then
remove it from the slot.
CAUTION! Attempting to insert a memory card wrong may damage the device and/or the
memory card itself. Make sure the memory card is in the correct position. Do not apply
excessive force when inserting a memory card.
Warning:
Do not apply excessive force when inserting a memory card to avoid damage to the
device. To insert a memory card, please insert the micro SD card into the slot until it locks
(clicks); if necessary, use a needle to push the card further. To remove the memory card,
please push the card until it clicks and remove the card from the slot, if necessary, use a
needle to push the card.
Turning the Device ON/OFF
After turning on the car ignition, the device automatically turns on and video recording is
activated.
Turning ON/OFF and Resetting Manually
To turn the device on manually, press the power button.
To turn off the device, press and hold the power button for ~3 seconds.
11
EN