KTM 63512932044 Instrucciones De Montaje página 31

Opening the cases
–
Move the key 90° to the right
–
Slide the push button to the rear fully, press down and at
the same time, open the cover.
500447-01
Closing the cases
–
Close the cover firmly.
The lock engages audibly.
–
Turn the key back into the locked and secured position
and remove it.
500448-01
Assembly
–
Turn the key 45° clockwise
The handle pops up automatically.
The cases are released and can be mounted or taken
off.
–
Position right case
ded) and, simultaneously, position it in the guides of the
upper case rack (not included) from above.
The case hooks are seated firmly in the upper case
500449-01
rack.
–
Push the handle all the way down and turn the key back to
vertical position
–
Position left case
and, simultaneously, position it in the guides of the upper
case rack (not included), from above, until it is firmly sea-
ted on the case rack.
The case hooks are seated firmly in the upper case
rack.
–
Push the handle all the way down and turn the key back to
vertical position
Guideline
500450-01
Make sure that all accessory parts are securely attached.
Regularly check all connections to ensure that they are
tight.
H
.
I
.
2
on the lower case rack (not inclu-
G
and remove.
1
on the lower case rack (not included)
G
and remove.
ASSEMBLY 5
G
11