Technical Data; Factory Settings - LEGRAND 036 10 Manual Del Usuario

Remote dimmer 1000 W
036 10

Technical data

±
110 V 500 W 500 W
±
230 V 1000 W 1000 W
Incandescent lamp
Halogen lamp
Halogen lamp with ferromagnetic or
eletronic transformer
Description
Load type indication.
the colour of the LED (green/orange)
has no impact on the product's proper
functioning. When using the product
with a lighting load, simultaneously
press the ON, OFF,
+ and - keys for 10 seconds.
XX CLASS 122
PLC ID XX XX XX
100-240 V
50-60 Hz
5A
Control button
N L
500 VA
1000 VA
Electronic protection :
- In case of overload and above the maximum use temperature, the product
automatically regulates the power with reduced lighting.
- In case of short-circuit or high overload, the dimmer switch goes off. After
fault clearance, the product is again operational.
LEARN indicator
LEARN button
LEARN
/
ON / 1
OFF / 2 /
N
Voltage
Frequency
Dimensions
13

Factory settings

When first powered up, pressing the ON
or OFF buttons controls all the lighting
points of the "In One by Legrand" instal-
lation.
This option is provided so that the cor-
rect operation and connection of all the
lighting fixtures can be checked.
Indicates the
lighting level
Pressing Learn
general control function.
(1) Programming or learning button.
Control button
First LED comes
on red if protection
device
14
±
100 - 240 V
50 - 60 Hz
2 x 1,5 mm 2 or 1 x 2,5 mm 2
4 modules
EN 50065 - IEC 60669-2-1
-5°C à + 45°C
(1) twice cancels this