Velleman 802 Manual Del Usuario página 3

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a Velleman product! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
This device is designed as an add-on to existing power door locking system. When arming/disarming an alarm
system, the device will control the door automatic lock/unlock. It will provide more convenient for you and more
secure to your vehicle.
Warning: Use the information enclosed as a guide only. Car makers are constantly changing wire colours and
system types. Determine the type of system the vehicle has before proceeding.
2. Installation
Be sure to disconnect the car's battery before installing, and to install this device in a suitable position of interior car.
1. 3-WIRE PLUG
A. RED WIRE
Connect to a positive constant power supply (+12V)
B. BLACK WIRE
Connect to a good chassis ground. (-)
C. BLACK/WHITE WIRE
Connect to alarm system's negative power output wire. (SP500'B)
2. 6-WIRE PLUG
A. YELLOW, VIOLET AND VIOLET/WHITE WIRES
This is door unlock wire set.
Connect yellow wire to "N/C", violet wire to "COM", violet/white wire to "N/O"
B. WHITE, BLUE AND BLUE/WHITE WIRES
This is door lock wire set.
Connect white wire to "N/C", blue wire to "COM", blue/white wire to "N/O"
Note : The blue/white wire and violet/white wire are with one 10A inline fuse.
3. GREEN WIRE LOOP (DOOR LOCK TIMER SELECTOR)
Some newer vehicle require longer pulse time to activate the door locks, keep this wire loop for normal pulse 0.6
seconds. Cut this wire loop for increased pulse time 3.6 seconds.
802
802 – POWER DOOR LOCK INTERFACE
3 VELLEMAN