MHTeam EH6 Manual De Instrucciones página 3

GB
Thank you for choosing a MHTeam product. To guarantee a safe and fulfilling use of this
product READ INSTRUCTIONS CAREFULLY: Before using the heater, read this manual and
follow all the instructions. Place instructions in a safe place for future reference. Do not
allow anyone who has not read these instructions to assemble, switch on, adjust or use the
heater.
Failure to comply with an instruction marked with this symbol may cause danger,
personal injury or property damage, for which the manufacturer will not be responsible.
Follow all local and national technical, legal, health and safety regulations in force in the
Country of destination.
1. Product Description
EH6 is a portable electrical fan PTC heater. The EH6 technology allows the safe and efficient
use of the heater. The intended use of this product is the comfort heating of small rooms,
offices, workstations, etc. See picture for heater layout.
2. Preliminary Instructions
Take the heater out from its carton. If the unit is somehow damaged, do not use it and
contact your dealer.
Put the heater on a flat, level, non-flammable, solid surface. Connect the plug to the
appropriate earthed (230V 50Hz single-phase) electrical outlet.
Ensure a minimum of 1 m safety clearance between the heater and any surrounding
objects and materials, on all sides.
Only operate the heater in normal upright position.
Do not place the heater near walls, corners or low ceilings.
Do not place the heater below a socket outlet.
Do not place the heater on moving vehicles or where it can tip over.
Keep the heater away from flammable, combustible, explosive or corrosive materials.
Keep the heater away from curtains or similar materials that could block the air inlet and
outlet.
Keep the power cable away from heat sources, sharp edges, cutting and moving parts.
For indoor use only. Do not expose to the weather or to humidity.
Do not place the heater in the immediate surroundings of a bath, shower or swimming
pool.
Do not use plug adaptors.