Publicidad
Idiomas disponibles
Idiomas disponibles
PAIRING THE SPEAKER
1. Activate the speaker's Bluetooth mode using the button. A blue light starts flashing.
2. Open the Bluetooth connection screen on your phone and search for new devices.
3. Look for the Bluetooth device known as "TNB SPEAKER".
4. If required, enter the PIN 0000 and then press "Yes" or "Confirm".
If the connection is successful, a blue light is steadily illuminated. If the pairing fails,
the blue light will flash and the pairing will need to be repeated.
LISTENING TO MUSIC
• Track search: press +
previous track.
• Volume control: press and hold +
to reduce the volume.
\ –
• Play/Pause: press
RECEIVING CALLS
Calls can be made or received when the speaker is connected.
• Receiving calls: press
seconds to reject a call
AUX FUNCTION
• Connect a 3.5 mm audio cable to the "AUX" port located at the back of the speaker.
• Connect the other end of the cable to your device and listen to music!
SD CARD FUNCTION
• Insert your SD card into the card slot located at the back of the speaker and listen
to your playlist!
to play the next track; press
/
to increase the volume; press and hold
/
to pause; press again to resume.
to answer a call. Press again to hang up. Press for 2
to go to the
\ –
EN
Publicidad
