Uline S 1000XR Instrucciones De Montaje página 2

Cable
Channel
Figure 2
Modesty
Panel
1⁄" Socket
Screws
Figure 3
PAGE 2 OF 6
ASSEMBLY CONTINUED
Locking
Casters
Lever
2. Using enclosed 4 mm Allen wrench, attach modesty
panel to legs with four 1⁄" socket screws. Make
sure that the cable channel is facing away from
the elongated part of the leg as shown. Attach four
locking casters to the legs as shown. Tighten with
enclosed double sided wrench.
(See Figure 2)
3. Using two people, set the table upright. Grasp the
lever on either side of the tabletop and depress
to release lock and lift tabletop until it locks in the
upright position. To lower tabletop, depress lever to
release lock and gently lower tabletop until it locks
in the down position. (See Figure 3)
1-800-295-5510
uline.com
1⁄" Socket
Screws
0222 IH-6932