Publicidad
Idiomas disponibles
Idiomas disponibles
Using the
self adjusting laser
Switch on/off the tool by pressing button A or button B
·do not look into the laser beam.
·do not point the laser beam at persons or animals.
·always switch off the tool after use.
·always lock the self-leveling system after use and.
during transportation by sliding switch C in the lock-position.
·
Operating the tool
·position the tool on a horizontal
·switch on the
tool.
If the surface inclines more than 4°, the tool is out of its self-leveling range
·level the tool by turning adjustment knobs E in such a way that the bubbles in levels F are
centered -only use the bubble levels as a first rough indication for leveling.
·project a horizontal line by pressing button A.
·project a vertical line by pressing button B.
·project a crossed line by pressing button A and B
·obstructions in front of the tool will not affect the line projection.
·use the tool manually for quick reference of a straight-line or alignment of two points of
reference (lock the self-leveling system)
surface.
one after the other.
Publicidad
