Before Starting - Energeeks EG-CIP002 Guía De Instalación Rápida

Before starting

Download the application "Energeeks 3.0" on your mobile
phone; it is available on Google Play and APP Store. For
the Wifi connection, the camera only supports the 2.4
GHz frequency, (it does not support 5g), it is necessary
to connect the installed phone to the 2.4g network (only
during the installation process), once the camera is
installed you can reuse 5g. If you prefer, it also has rj45
connection to connect it via network cable.
Wifi Installation
• Conecte o adaptador à câmara e espere uns segundos,
a câmara realizará um teste movendo-se para os lados,
acima e abaixo.
• Connect the adapter to the camera and wait a few
seconds, the camera will perform a test moving
sideways, up and down.
• At the end of the test, the camera lens looks up,
discovering the SD card slot and the reset button.
• Press reset for 5 seconds to reset the camera to
connection mode. (The camera will retest and you will
hear "wait for wifi config").
• Connect your phone to the 2.4g network and open the
application "Energeeks 3.0"
• Press the + sign at the top to add a new device and
21