KAISDA K6 Guia Del Usuario página 8

screws of the rack respectively.
Foot pedal installation:
6.
Check the two pedals. The pedal with "L" printed on the end of the mandrel
should be installed on the left side of the vehicle (without chain ring), rotate
counterclockwise, and the "R" pedal should be installed on the right side.
(With chain ring), rotate clockwise, and then use a No. 15 wrench Tighten
the pedal spindle.
Saddle installation:
7.
Open the package and take out the seat saddle and seat post. Install
7.1
the rear reflector on the seat post.
Insert the seat post into the frame.
7.2
Adjust the seat position to the height that best suits your riding position,
7.3
and tighten the quick release (please ensure that the quick release is locked)
Adjust the brakes, meters and transmissions system, and then
8.
-6-