Shelly Motion 2 Guía De Uso página 6

ENGLISH
2. Starting
Press briefly the Reset button (fig.1 C)
using a pin to turn on the Device.
Be careful not to insert the pin
⚠CAUTION!
into the round hole of the charging indicator
(fig. 1 A). The reset button has an oblong
shape (fig.1 C).
The LED indicator behind the motion sensor
lens (fig.1 D) will start flashing in red, green
and blue sequentially for a while and then
turn steady blue. The Device is now in AP
(access point mode).
If the motion sensor de-
⚠IMPORTANT:
tects movement while the Device is in AP
mode the LED indication will briefly change
to cyan.
If the Device has not been
⚠IMPORTANT:
added into your Wi-Fi network in 3 minutes, it
will switch off. Press briefly the Reset button
to start it again. Pressing the Reset button
while the Device is in AP mode will turn off
the Device.
3. Inclusion to Shelly Cloud
If you choose to use the Device with the
Shelly Cloud mobile application and Shelly
Cloud service, instructions how to con-
nect the Device to the Cloud and control it
through the Shelly App can be found in the
App Guide. Shelly Mobile Application and
Shelly Cloud service are not conditions for
the Device's proper functioning. This Device
can be used stand-alone or with various
other home automation services and appli-
cations.
6
User and Safety guide