Endress+Hauser NAR300 Manual De Instrucciones página 18

Recepción de material e identificación del producto
18
A
B
 7 Placas de identificación de NRR261
A Placa de identificación de NRR261 para FM (NAR300 de tipo separado)
B Placa de identificación de NRR261 para ATEX/IECEx (NAR300 de tipo separado)
1 Código de pedido
2 Número de serie
3 Tensión de alimentación
4 Fecha de fabricación
Sistema NAR300 para alta temperatura
Order Code
Seri. no.
XP-AIS Class I, Div. 1,2, Gp. C, D, T6
Class I, Zone 1[1], AEx db [ia] IIB T6
Ambient temperature: -20°C ~ + 60°C
Intrinsically safe circuit:
Uo = 28 V Io = 85 mA Po = 595 mW Co = 0.083
Non intrinsically safe circuit:
3
Power supply:
Um : AC 250 V 50/60 Hz, DC 250 V
Contact output : 5 A 250 V AC, 5 A 30 V DC
4
Manufacturing date:
Conduit entry of the main body: M26 x 1.5
Caution: A seal shall be installed within 18 inches of the enclosure.
: Do not modify internal parts or circuits.
: Use supply wires suitable 70°C minimum.
: Do not open the cover when energized.
: Refer to control drawing Ex1088-1282-*.
WARNING: AFTER DE-ENERGIZING, DELAY 10 MINUTES BEFORE OPENING.
Endress+Hauser Yamanashi Co., Ltd
Yamanashi 406-0846 Made in Japan
Order Code
Seri. no.
ATEX: II 2G Ex db [ia Ga] IIB T6 Gb
FM 14ATEX0048X
IECEx: Ex db [ia] IIB T6 Gb
IECEx FMG 14.0024X
Ambient temperature: -20°C ~ + 60°C NEMA 4X, IP67
Intrinsically safe circuit:
Uo = 28 V Io = 85 mA Po = 595 mW Co = 0.083
Non intrinsically safe circuit:
3
Power supply:
Um : AC 250 V 50/60 Hz, DC 250 V
Contact output : 5 A 250 V AC, 5 A 30 V DC
4
Manufacturing date:
Conduit entry of the main body: M26 x 1.5
Caution: Do not modify internal parts or circuits.
: Use supply wires suitable 70°C minimum.
: Do not open the cover when energized.
: Refer to control drawing Ex1088-1282-*.
WARNING: AFTER DE-ENERGIZING, DELAY 10 MINUTES BEFORE OPENING.
Endress+Hauser Yamanashi Co., Ltd
Yamanashi 406-0846 Made in Japan
NRR261
1
2
NEMA 4X, IP67
F Lo = 2.4mH
μ
NP-2739
NRR261
1
2
F Lo = 2.4mH
μ
NP-2738-1
Endress+Hauser
A0039867