Hayward Salt & Swim 2.0 Manual De Instalación página 3

GB
INSTALLATION GUIDE: CELL AND FLOW SWITCH
To guarantee safety of all the installations, the mechanical flow switch is added to the gas detector. All our
control boxes are now equipped with 2 security features to stop chlorine production and injection of chemicals
if there is no flow in the piping system.
Please follow the installation instructions for the cell and for the mechanical flow switch.
This box contains: 1 PVC cell mount, 1 salt chlorination cell, 1 threaded nut, 1 mount with ¾" hole, 1 mechanical
flow switch with 1.5m of cable, 1x ¾" fitting and 1x ¾" O-ring.
Installation and connection of the cell (see diagram no. 1):
• Install the cell mount vertically (if the cell is installed horizontally, see the remarks).
• Install the cell in a bypass.
• Install the cell at the highest point of the piping system.
• Connect the power cable and the gas detector cable to the control box (see diagram no. 2).
Installation and connection of the mechanical flow switch (see diagram no. 1):
• Install the flow switch mount (part A) before the cell and on the bypass.
• Unscrew the white protective cover of the mechanical flow switch.
• Screw the ¾" fitting onto the flow switch.
• Put the ¾" O-ring supplied with the kit in place.
• Screw the flow switch onto its mount.
• Connect the red and black cable to the electronic circuit board (see diagram no. 3).
Remarks:
• The control box has already been programmed in the factory to operate using the 2 security features.
• Connect either the red or the black cable.
• If the cell is installed horizontally, please contact your distributor to cancel the gas detector security
feature in the control box.
OVERALL INSTALLATION
Diagram no. 1
Cell
Probes
pH
minus
Ø63 mm
CONNECTING CELL TO CONTROL BOX
Diagram no. 2
Salt chlorinator
Gas detector
Flow
switch
Cell power
cable cable
CONNECTING THE DETECTOR
TO THE ELECTRONIC CIRCUIT BOARD
Electronic circuit board no. 1
Connection of
flow detector
to terminals 2
and 5
Electronic circuit board no. 3
Connection of
flow detector
to terminals 2
and 3
Only use spare parts supplied by Hayward
ENJOY YOUR SWIM IN TOTAL SAFETY!
Diagram no. 3
Electronic circuit board no. 2
Electronic circuit board no. 4
Connection of
flow detector
to terminals 1
and 3
brands
®
Connection of
flow detector
to terminals 2
and 3