Publicidad
Idiomas disponibles
Idiomas disponibles
• Maintenance and service operations are only to be carried out by
authorized professionals.
• Any damage caused by manual modifications to the product is not
covered by the warranty.
• If this product is used for other purposes than the ones originally
intended, or if it is not correctly connected, the product may become
damaged and the warranty will be voided.
• Warning! After assembly, it's strictly forbidden to remove the protec-
tive guards during maintenance or cleaning.
• Never use the fan without the guards in place.
8
USB fan
2. OPERATING INSTRUCTIONS
2.1. Product Description
1. Front Grill
2. Blade
3. Blade axle sleeve
4. Motor
5. Motor Clip
6. Rear Grill
7. Switch
8. Stand
9. Rubber Feet
10. USB Cord
2.2. Using the Product
1. Adjust the desired speed by pressing the switch: 0 - Stop I - ON
2. Adjust the tilt angle by pushing the grill.
3. Use the adaptor shown below:
2.3. Maintenance
Disconnect from mains before performing maintenance or cleaning operations.
Use only a damp cloth to clean the enclosure.
Plastic parts should be cleaned with mild soap and a damp cloth. The fan must be cleaned
thoroughly before storage and covered with plastic bags and stored in a dry place.
KTF3366
KVU3366
9
EN
Publicidad
