Diseqc 1.0; Diseqc 1.1; Lnb Power; Quick Search - Maxital M-345 Manual De Uso

3.1.8. DiSEqC 1.0

Press ←→ key to set the DiSEqC 1.0 port range from port 1 to port 4

3.1.9. DiSEqC 1.1

Press ←→ key to set the DiSEqC 1.0 port range from port 1 to port 16
 In Unicable / SCR mode: press the ← → key to change Pilot from 1 to 4.
 In Unicable / DCSS mode: press the ← → key to change Pilot from 5 to 16.

3.1.10. LNB power

key to Switch LNB Power ON/OFF
Press ←→

3.1.11. Quick search

When parameters have been set done, press into Satellite quick
search. There will have some signal information displayed on the
screen.
Tp search: press to search the cur r ent TP
Auto search: P r ess the r ed key to automati- cally search
for the current satellite.
Costellation: P r ess the g r een key into the constellation.
Spectrum: P r ess the yellow key into the Satelliete Spect r um. Please r efer to
3.4.1 Spectrum_S2 for detail.
Capture: P r ess the blue key to capture the cur r ent picture
(N.B. requires the use of a USB key connected to the instrument)

3.2. DVB-T2

Select Terrestrial, then press

3.2.1. Country

Press into the country list. Use ↑↓ key to move the cursor, then
press to select the country you want.

3.2.2. Channel

Press into the channel list. Use
want.
.
into the terrestrial Setup.
key to move the cursor, then press
↑↓
6
M345 | USER MANUAL
.
.
to select the channel you