Publicidad
Idiomas disponibles
Idiomas disponibles
I N S T A L L A T I O N
Insert the new red cover that came with the solar panel so
2.
that the new cover sits completely plane to the back of the
WLAN Battery Cam and ensures waterproofing.
Tip: To position the small rubber anchor on the inside of the
new cover, you can use a narrow object, such as a very small
screwdriver. Make sure that the anchor holds the new red
3.
cover securely.
Important: To ensure the required watertightness, the new
cover must sit flat and centered all around with no bulging.
4.
14
5
6
English
English
Connect the micro USB plug of the solar panel
cable to the micro USB port of the Wi-Fi battery
cam. Make sure that the connector is properly and
firmly seated. Also make sure that the rubber seals
are seated correctly to ensure waterproofness.
Tip: In the live view of the app, you can see via
the battery symbol - similar to the charging of a
smartphone - as soon as the solar panel charges
the camera battery in sunshine.
Once all the components have been assembled,
check again that the new cover on the back of the
camera and the micro-USB connector are fitted
tightly so that the connection is waterproof.
Depending on the mounting situation on site: You
can use the cable clamps to fix the cable between
the solar panel and the camera to provide strain
relief or as desired.
15
Publicidad
