Using The Remote Control; Switching The Unit On/Off - Webasto Cool Top Trail 28 Instrucciones De Uso Y De Instalacion

5.5

Using the remote control

Fig. 24 Remote control overview
Display icons Information
1 Mode display COOL / FAN / DRY / HEAT / AUTO
2 Fan speed dis- Low / Medium / High / Auto
play
3 Lock function
display
4 Sleep function
display
5 Timer ON/OFF
status indicator
6 Clock/Timer dis- Real time clock, Time of timer during
play setup.
7 Temperature Shows the setpoint temperature or the in-
display door temperature. Units in °C or °F.
8 Data Transmis- Symbols shows up briefly when the re-
sion mote control transmits data to the A/C
unit.
Operating but- Function
tons
9 DIM* Selects the brightness of the LED lights:
25%, 50%, 75%, 100%
10 LOCK Disables the touch control on the air dis-
tributor when the unit is ON. Press the
button again to unlock.
11 MODE Selects the operation mode COOL / DRY /
FAN / HEAT / AUTO.
9042924A OI-II CTT 28
Operating but- Function
tons
12 FAN Selects Low/Medium/High or AUTO fan
speed. AUTO fan speed is only possible in
COOL/HEAT mode. With AUTO fan speed
the fan automatically adjusts between
Low, Medium and High.
13 SLEEP Selects the sleep mode. Only available in
COOL or HEAT mode.
14 SET TIME Enters CLOCK / TIMER setting mode.
15 HOUR/MIN Changes between hour or minutes set-
tings.
16 TIMER Activates different timer settings.
17 DISPLAY Switches the display of the air distributor
On/Off.
18 LIGHT* Switches the LED lights on the air distrib-
utor On/Off.
19 Up/Down Adjusts the setpoint temperature, clock or
timer.
20 ON/OFF Switches the system On/Off.
21 °C/°F Selects the temperature units, Celsius or
Fahrenheit, of the temperature display.
* Only applicable to units with LED lights.
5.6

Switching the unit ON/OFF

To switch the unit on, press the
Fig. 25 Switching the unit on
l The unit switches on and the display of the air distributor
shows the set temperature and operation mode.
l The display of the remote control shows the set temperat-
ure, operation mode and fan speed level.
l The last settings are retrieved.
l The indoor fan may start immediately if the unit is in fan or
cool mode. If in heating mode there will be a delay while
the inside coil heats up before the inside fan turns on - pre-
venting a cold draft.
l It may take up to 3 minutes for the compressor to start op-
eration. This is a feature to protect the compressor.
To switch the unit off, press the
Fig. 26 Switching the unit off
l The unit switches off, the display of the air distributor
blanks.
Operating Instructions | 5
button on the remote control.
button again
11 / 136