Led Indicator Guide - Swann Fourtify Guia De Inicio Rapido

LED indicator guide

The status LED on the Fourtify main camera tells you what is happening with the device connection.
Slow Blinking Blue
Fast Blinking Blue
Replacing the MicroSD Card
The Fourtify main camera comes with a 64GB microSD card pre-installed for recording events and
performing firmware updates. To replace this card (max. 256GB card supported):
1
Remove the port cover at the bottom of the camera using a Phillips screwdriver.
2
Eject the current microSD card (push in until it clicks) from the microSD card slot and then insert
the new microSD card into the microSD card slot until it clicks into place.
3
Restart the camera (unplug and replug the power). You will hear the voice prompt "SD Card not
recognised, SD Card will be formatted next". The camera will automatically format the microSD card for use
with the system. Once formatting is complete, you will hear the voice prompt "Camera is ready".
4
Replace the port cover with the previously removed screws.
Swann Security app manual
To better understand the Swann Security App's interface and features, access the app manual (Menu
> User Manual). You can learn about navigating the various app screens to view live camera
streams, playback recordings, configure push alerts, adjust camera settings, and more.
Have questions?
Visit our Support Center at support.swann.com. You can register your product for dedicated technical
support, find troubleshooting articles, and more. Or email us at any time via: tech@swann.com
HELP AND RESOURCES
Wi-Fi Pairing mode
Connecting to Wi-Fi
Solid Red Live streaming / Motion recording
Blinking Purple Low Wi-Fi signal
EN
9