Descargar Imprimir esta página

Technical Data; Intended Use; Safety Informations - BGS technic 71032 Instrucciones De Uso

Publicidad

Idiomas disponibles

Idiomas disponibles

PARTS
1
Pump knob
2
Pump
3
Pressure hose
4
Filling opening with lid
5
Pressure gauge
6
Pressure relief valve
7
Adapter for brake fluid tank
8
Adapter for bleeding valve
9
Bleeding hose
10 Bledding bottle
11 Chain and hook for hanging
12 Adapter wrench

TECHNICAL DATA

Container capacity: 4 liters
Pressure range: 0-1.9 bar (0-28 psi)
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-compliance
of the safety instructions may lead to damage, personal injury and to termination of the warranty. Keep
these instructions in a safe and dry location for future reference. Enclose the operating instructions when
handing over the product to third parties.

INTENDED USE

This clutch and brake bleeder is used to bleed hydraulic brake and clutch systems on passenger cars and
is suitable for most vehicles with expansion tank lid according to European standards.

SAFETY INFORMATIONS

Keep children and unauthorised persons away from the work area.
Do not let any children play with the tool or its packaging.
Make sure that the work area is sufficiently illuminated.
Keep the work area clean, organised, dry and free from other materials.
Do not allow untrained persons to work with this bleeding tool.
Always wear eye protection. If brake fluid contacts eyes, flush with water immediately and seek
medical attention.
Brake fluid is poisonous, do not ingest. If you do ingest brake fluid seek medical attention
immediately.
Always use new brake fluid from sealed container when bleeding hydraulic brake system.
Do not allow brake fluid to contact vehicle paint. Wash with water immediately if brake fluid is
dropped on paint.
Never operate vehicle if you are in doubt of the effectiveness of the braking system. Drive the
vehicle only when brake pedal has a clearly defined pressure point and all components have
no leaks.
Brake systems should be maintained by qualified personnel only!
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Brake and Clutch Bleeder
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
BGS 71032
L
d . l h
a t s
w
s
@
o f n i
: l i

Publicidad

loading