Power Energy; Power Cord And Other Cables; Humidity And Water; Cleaning - Kunft KDF 2377 Manual De Instrucciones

These instructions are also available on
www.suporteworten.pt

1.1. Power Energy

Make sure the voltage of the electric network
is compatible with the one of the appliance.
If it does not match, consult the vendor or
Customer Support Service.

1.2. Power Cord and Other Cables

Do not roll up or pull the cord to disconnect
the appliance, and do not use to twine the
appliance. Keep the cord far from warm sur-
faces.
Never use the appliance if it has a damaged
cable or socket, or if it is not working pro-
perly.
In case of damage of the power cord, do not
use your appliance. Take it to technical as-
sistance for its replacement.

1.3. Humidity and Water

Do not use your appliance in humid places.
Do not let your appliance to catch water un-
der any circumstance, as it may be dange-
rous. TO AVOID FIRE HAZARD OR ELEC-
TRIC SHOCK DO NOT EXPOSE YOUR
APPLIANCE TO HUMIDITY OR WATER.
Do not place your appliance under water
(for example for washing).
6
desk fan 23 cm

1.4. Cleaning

Before cleaning, be sure to switch off the ap-
pliance and remove the plug from the mains
power supply.
Use only a damp cloth to clean the enclo-
sure.
Switch off and unplug from the power sup-
ply before assembling or disassembling and
cleaning.
Keep the air vents at the rear of the main
body free from dust or fluff-use a vacuum
cleaner to remove these when necessary.
Do not probe any opening to remove fluff.
Fan component parts should be cleaned
using mild soap and a damp cloth or spon-
ge. Do not allow any water or other liquid to
enter liquid to enter the motor housing.
Thoroughly remove soap film with clean wa-
ter.

1.5. General Precautions

• Please follow the instructions of the user
manual, which helps properly installing
and operating this product and enjoying its
advanced features. Please keep the ins-
tructions for future reference.
• Read all instructions before using the pro-
duct.
• Do not use the product if the supply cord
is damaged. If it is the case, it must be re-
EN
KDF 2377 9"
7