Publicidad
Idiomas disponibles
Idiomas disponibles
Guard" , part number 9.558-998.0
(sold separately), to prevent cold
weather damage during storage in
the winter months.
Maintenance Instructions
Cleaning the Water Inlet
1. Disconnect the connector from the
water inlet.
2. Rinse out the water inlet filter in warm
water.
3. Thread the connector into the water
inlet.
Maintenance
This unit is maintenance free
Filter
Cleaning Tips
●
Before cleaning any surface an
inconspicuous area should be
cleaned to test spray pattern and
distance for maximum cleaning
results.
●
If painted surfaces are peeling or
chipping, use extreme caution as
pressure washer may remove the
loose paint from the surface.
●
When using on surfaces which might
come in contact with food, flush
surfaces with plenty of drinking water.
●
For additional cleaning tips, visit our
website:
www.Karcher.com/us/
Deck Cleaning
(With or without detergent).
Pre-rinse deck and surrounding area
with fresh water. If using detergent,
apply to surface at low pressure. For
best results, limit your work area to
smaller sections of approximately
25 ft² (2.3 m²). Allow detergent to
remain on surface 1-3 minutes. Do not
allow detergent to dry on surface.
Rinse at high-pressure in a long
sweeping motion keeping the spray
nozzle approximately 3-6 in. (7.5-15
cm) from the cleaning surface. Always
clean from top to bottom and from left
to right. When moving on to a new
section of the cleaning surface, be
sure to overlap the previous section to
eliminate stop marks and ensure a
more even cleaning result.
English 15
Publicidad
