Installation Of Mount - Newskill ICARUS RGB 24.5 Manual Del Usuario

4. Installation of mount

1
Open the package to take out foams and put them on a flat tabletop.
Take out all accessories from foams and take out the upper foam. First, remove four screws locking
2
the rear casing with a Phillips screwdriver (optional). (During disassembly of screws, do not take
the screen out from the foam to avoid damage to the screen)
Take out four studs for hexagon irons from the accessory bag to and lock them on the rear casing.
(Do not take the screen out from the foam to avoid damage to the screen)
Remove four screws
During hanging of the product, do not pinch the screen with hand to avoid damage to the screen.
3
Tips: The mounting hole distance of the mount for the product is 75x75mm.
Mount (not included)
ICARUS SERIES
Wall mounting screws
EN
9