Installation; Connecting To A Power Outlet; Inserting / Replacing Batteries; Use - essentiel b Lumin'Up II Instrucciones De Uso

installation

Connecting to a power outlet

1.
on the back of the device.
2.
sure that the voltage in your home matches the voltage
indicated on the nameplate on the back of the device.
3.

Inserting / replacing batteries

Thanks to the batteries, the alarm settings and preset radio stations will be saved in the event of
a power failure.
1.
cover on the back of the device.
2.
relevant.
3.
the (+) and (-) polarity indicated.
4.
!
If you do not insert batteries, you will have to set the clock again if you
•
experience a power failure.
Use only the type of battery specified in this manual.
•
Replace the batteries when they are worn out or leaking.
•
Remove the batteries if the device is not used for a long time.
•
18
Plug one end of the power cord into the power connector
Then, insert the other end into a power outlet, making
The display is enabled.
Use a screwdriver to remove the screw from the battery
Take off the cover and remove the used batteries, if
Insert 1 x CR2032 batteries in the compartment, observing
Then, put the cover back in place.

use

Setting the time

Note: to set the time, the MUSIC function must be disabled. To turn off the MUSIC function, press
the button.
To start setting the time, long press the button. The year digits start to flash.
1.
To scroll through the different setting steps, press once or several times on the
2.
The setting cycle is as follows:
Year > Month > Day > Format (12Hr or 24Hr) > Hour > Minute
When one of the setting steps has been selected, it starts to flash.
Use the (decrease) and (increase) buttons to reach the number you want. To make the
3.
numbers scroll faster, keep the button pressed down.
To save the number, press the button. The digit stops flashing and the setting cycle
4.
automatically moves to the next step.
C :
omment
When using the 12-hour setting format instead of the 24-hour setting format, the term "PM"
•
(Night) is displayed to differentiate between daytime and night-time.
CHANGING BETWEEN WINTER / SUMMER TIME
Hold the button down to move quickly to summer time or winter time (+ or - 1 hour).

Adjusting the volume

To turn up the volume, press the button.
•
To turn down the volume, press the button.
•

Display screen

To adjust the brightness of the display screen, use the
•
3 levels of brightness.
To show the date, press the button twice.
•
The display cycle is as follows: Year > Day/Month> Time.
button.
button. You can choose between
19