Replacing The Fluorescent Light Bulb (Fig. 19) - SPM BIG JUICE Manual De Instrucciones

Use and installation manual
Replacing the fluorescent light bulb
(Fig. 19)
To replace the fluorescent light bulb, proceed as
follows:
- Switch off the device and unplug from mains.
- Unscrew the four bolts (O) fastening the front
panel (U). Replace the fluorescent light bulb (S),
removing it from its seat by pulling upwards, as
shown in Fig. 19, and then replace with a new
one.
Remember that before proceeding with
these special maintenance operations, it is
compulsory to switch off the device and
unplug it from the mains.
Fig. 19
th
Issue date: 28 Oct 2009 Revision: IMQ Page : 33/84