Picture Setup - SunTech TLXRI2485HD Manual De Instrucciones

PICTURE SETUP

1. Press the TV-MENU button on the remote
controller to display the OSD main menu.
t u
2. Press / button to select the PICTURE menu.
p q
3. Press / button to select each item.
4. Press the TV-MENU or EXIT button to exit from the menu.
Picture Mode:
Select a desired picture mode among
Mild are the factory preset picture mode and the parameter of those modes can not be changed. If
you want to adjust any items (e.g. Contrast, Brightness ,Clour and sharpness etc), please select
User , and the settings will be stored in
C
You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast:
Adjust the color brightness of the image.
Brightness:
Adjust the darkness and lightness of the image.
Color:
Adjust the saturation level of color.
Sharpness:
Adjust the sharpness level of image.
Tint:
Adjust the tone of color when your system is in NTSC.
PICTURE
Color Temperature
User
Red
Green
Blue
Aspect Ratio
16:9
Noise Reduction On
EXIT
Quit MENU Back ENTER
USING THE MENUS
Dynamic, Standard,Mild
User mode.
Color Temperature:
Select a optimum color temperature level(Cool/
Standard/Warm) or customize by selecting User.
The level of Red, Green and Blue are can be
50
adjusted separately in user mode.
50
50
Aspect Ratio :
Select a display mode.
Noise Reduction
Select
If the broadcast signal received is weak, you can select
this function to reduce the video noise if the option set
the "On".
15
PICTURE
Picture Mode Standard
Contrast 50
Brightness
50
Color 50
Sharpness
50
Tint
0
EXIT Quit MENU Back ENTER Select
and User Dynamic, Standard .
:
and