Loewe Active Glasses 3D Instrucciones De Manejo página 7

Start-up
Thank you
for choosing a Loewe product. We are happy to welcome you as our customer.
Loewe offers you the highest technological standards, the best design and
optimum user-friendliness.
Charging the in-built battery
A battery is fitted in the glasses in the factory (not replaceable).
Before first use, the 3D glasses must be charged for about 3 h. A full charge
lasts for approx. 20 h of use.
Plug the (small) micro USB plug on the USB cable provided into the micro
USB socket (A) at the bottom right of the glasses frame. Insert the (large)
plug at the other end of the USB cable in the correspon-ding USB socket
(type A) on a unit which supplies peripheral equipment with power, e.g. your
Loewe TV set (not in standby mode) or a computer or USB mains power unit
(obtainable as an accessory from your specialist dealer).
The LED on the inner right-hand side underneath the ON button (B) is per-
manently illuminated when the glasses are charging. The display goes out
as soon as the charging process is finished. Remove the USB cable as soon
as the glasses are full charged. The glasses are fully charged if the red LED
does not light up when the USB cable is plugged in.
B
A
Micro USB cable
7 -