Rf Adapter; Operating Range Of Remote Control Unit For Infrared (Ir) Signal Transmission - Pioneer CU-RF100-U Manual De Instrucciones

Controls and displays
6 Area indicating the remote control's
status
7 Nothing displayed
Nothing is displayed here when the remote
control code sending mode is set to IR.
8 Scroll indicators
Light when there are more selectable items
when making the various settings.
9 Receiver input indicator
This indicates the input function currently
selected for the receiver's zone.
10 Receiver display
The same information as on the receiver's
display is displayed here.
11 Master volume display
This indicates the volume of the receiver's
main zone using, as an icon and in decibels
(dB). When the sound is muted, the
displayed.
12 Area indicating the receiver's status

RF adapter

Front
1
Rear
icon is
2
3
1 LED
2 SETTING
Use to pairing the RF adapter and remote
control (page 6).
3 IR blaster terminals
Connect the IR blaster cable (page 7).
Operating range of remote
control unit for infrared (IR)
signal transmission
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
30°
30°
7 m (23 ft.)
04
25
En