Publicidad
Idiomas disponibles
Idiomas disponibles
Before you start
Initial setup
• When you turn on the washer for the first time, the screen shows the initial setup process. Follow the
on-screen instructions to complete it.
• Once you select a language, the language selection screen will not reappear. However, you must
complete a wash cycle once to stop the tutorial screen from reappearing.
• The initial setup includes language selection and a brief tutorial.
• Tap OK to skip to the next screen.
01 Language selection
Turn dial & Tap OK
03 Tutorial
Let's explore
your new washer!
[Tap OK to skip]
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washer. Make sure the drum is empty before running
Calibration.
1. Tap
to turn the power on.
2. Tap WASHER.
3. Tap and hold Options for 3 seconds.
4. Turn the Navigation dial to select Calibration, and then tap OK.
-
Calibration does not start if the door is not closed properly.
-
The drum rotates clockwise and anticlockwise for about 3 minutes.
5. Tap and hold
to start operation.
-
When calibration is complete, the "Calibration complete" message appears on the display and the
washer turns off automatically.
28
English
Untitled-1 28
English
Español
02 Welcome screen
Welcome!
A washer that knows you!
All Done!
2022-04-11
12:23:44
Publicidad
Solución de problemas
