Descargar Imprimir esta página

WERKU WK403240 Instrucciones Originales página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
ENG ORIGINAL INSTRUCTIONS
DESCRIPTION OF THE PRODUCT.
The mixer has been designed to carry out mixing
jobs. Refer to this plan to familiarize yourself with the
mixer before use.
3
1. Switch.
2. Block button.
3. Speed control.
4. HEX13 spindle.
5. Gear selector.
6. Stirrer.
USE INSTRUCTIONS.
Before starting up the mixer, we recommend that
you carefully read all of the instructions as indicated.
Please respect all regulations regarding the preven-
tion of accidents, health and safety directives, laws
and applicable restrictions for work places. The mi-
xer must only be used by persons who have been
instructed in its use and only for the purposes for
which it has been designed.
2
1
5
4
6
English
POWER SUPPLY.
Make sure the power supply is adapted to the re-
quirements shown on the information panel of the
mixer (1). Using the motor at low voltage will make
it operate slowly. This will reduce performance and
may cause the motor to overheat.
EXTENSION CORD.
If the working area is at some distance from the
power supply, use an extension cord of enough dia-
meter and quality.
MIXER-STIRRER MOUNTING-REMOVING.
Before mounting or removing a mixer-stirrer, first
remove the main plug from the socket. This mixer
uses mixer-stirrers with a special system for quick
and easy mounting. Apply a small amount of grease
on the mixer-stirrer shaft. Pull the collar backward
and insert the shaft of the mixer-stirrer into the
chuck (2). Release the collar. In order to remove the
mixer-stirrer, pull the collar backward and remove
the mixer-stirrer from the chuck (5).
SWITCHING ON AND OFF.
When starting the mixer, hold it with both hands
since the torgue of the motor can cause the mixer
to twist. The safety switch is designed to prevent
accidental starts. To start the mixer, press the safety
button located on the handle with your thumb and
pull the trigger simultaneously (3). The mixer will
start to run continuously. To switch the machine off,
pull the trigger again (4).
PRE-SELECTING THE SPEED.
The mixer is equipped with a gear selector, making
it possible to use two different ranges of spin speeds
depending on the type of material being mixed (6).
Using the gear control the speed can be selected
continuously. The required speed will depend on the
type of material being mixed, with the recommendation
that a test is carried out with a small quantity
beforehand. Two speed ranges may be selected.
Range I: 200 - 480 RPM. Range II: 250 - 680 RPM.
SPEED REGULATOR.
The mixer is equipped with a speed regulator (7).
The ideal speed adjustment for each application
mainly depends on the user's preferences.
ELECTRONICS PARAMETERS.
The electronic parameters keep the speed between
load and no-load nearly constant and ensures uni-
form mixing of the materials.
5

Publicidad

loading