Storage And Care - Sunbeam 4027 Manual De Instrucciones

SH0338_SteamerIB 8/18/03 5:31 PM
5. Remove the water tank by pressing the "tank release"
button found at the base of the unit and slide the
water tank out by grasping the plastic handle.
6. Fill the water tank to the fill line. (this will provide 20
minutes of continuous steam) then replace water tank
using alignment arrows. Gently push into place until a
clicking sound is heard.This will insure the tank is
firmly in place.
7. When the green light illuminates this will indicate the
steamer is ready for use (approximately 90 seconds,
the red light will still be lit).
8. Hang your garment on the provided wall bracket (this
is located above and to the right of the steamer)
Hang one garment at a time.
9. Before steaming your garment shake out any excess
water from the wand. Holding at shoulder level, press
wand trigger to test steam output for 15 or more
seconds until steam flow is consistent and steady.
(You may hear a minor mechanical sound for 5 –10
seconds – this is normal)
10. Steaming your garment:
a. Point wand approximately 1 – 3 inches from
garment and press trigger.
b. Use a smooth upward and downward motion.
c. Continue until your garment is wrinkle-free.
11. When finished steaming replace steam wand and turn
unit off. (the product features Auto-Off after 30
minutes).
P R E P A R I N G F O R S T O R A G E
• Unplug the unit and allow a minimum of 10 minutes
for the main unit to cool down.
• Remove and empty the water tank, replace tank and
return wand to cradle.
All manuals and user guides at all-guides.com
Page 7
5
6
7
9
10
11
4

STORAGE AND CARE

S T O R A G E
• Always empty water tank when not in use. Never store product
with water in the tank.
• Always unplug unit when not in use.
• Always allow the product to cool for 10 minutes or more before
storing.
• The cooled-down Garment Steamer can be stored on an
unobstructed shelf or in an empty drawer.
• Do not store unit in contact with other items such as clothes, etc.
M A I N T E N A N C E
• Your SUNBEAM ® Garment Steamer requires very little maintenance.
• Always disconnect from electric outlet when not in use.
• Hard water use should be avoided whenever possible. Using
softened or distilled water ensures best performance and longest
product life.
• Product surfaces can be cleaned with damp cloth with or without
mild soap.
5