Haier QJS15HYRFS Instrucciones De Instalación Y Manual Del Usuario página 18

ACCESSORY
CONNECT WATER TO WATER
VALVE
WARNING
ELECTRIC SHOCK HAZARD
Attach tubing clamp using existing hole only. DO NOT drill
into the refrigerator.
WATER LINE CONNECTED
Refer to the Water Line Installation Instructions for
connection to the home water supply in the installation
instructions that came with your icemaker.
After water line installation is completed, set the
icemaker power switch to ON.
The icemaking cycle will not begin until the icemaker
and freezer compartment reach operating temperature,
then icemaking will begin automatically.
REINSTALL THE COVER
Reinstall the access cover. This requires using the
screws you removed
previously to reattach the
cover to the back of the
refrigerator case. This
must be reinstalled for your
refrigerator to function
properly. The water line
should come out at the
water tube relief slot at the
top right side of the access
cover.
18
Water
Line
READ AND SAVE THESE INSTRUCTIONS
ICE BUCKET INSTALLATION
INSTALL THE ICE BUCKET
• Remove the middle divider from the top freezer drawer.
Middle
Divider
• Remove the L-shaped insert by unscrewing the 3 screws
on each end. Insert the "buttons" provide into the holes
in the ice bucket.
Insert
Screws
• Place the ice bucket in the left side of the top drawer.
49-1000588 Rev. 0