4" & 6" LED DEEP BAFFLE
DOWNLIGHTS
Model: S11844, S11845
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• THIS DEVICE IS NOT INTENDED FOR USE WITH
EMERGENCY EXITS.
• Please examine all parts that are not intended to be
replaced by the retrofit kit for damage and replace any
damaged parts prior to installation of the retrofit kit.
• The retrofit kit is accepted as a component of a
luminaire where the suitability of the combination shall
be determined by authorities having jurisdiction.
Product must be installed by a qualified electrician in
accordance with the applicable and appropriate electrical
codes. The installation guide does not supersede local
or national regulations for electrical installations.
• LED Retrofit Kit installation requires knowledge of
luminaries electrical systems. If not qualified, do not
attempt installation. Contact a qualified electrician.
• To reduce risk of fire and over-heating, secure all
connections are tight.
• TURN OFF the electrical power before proceeding.
• To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
• Do not make or alter any open holes in an enclosure of
wiring or electrical components during kit installation.
• Dimming range: 10%-100%
WARRANTY: This product is guaranteed for a 5 year warranty. Any quality issue in normal use within the warranty
period, will be repaired or replaced according to the situation and under the condition specifications can be provided.
Visit www.Satco.com for full warranty details and dimmer compatibility information.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
© Copyright 2022 Satco Products, Inc. 5/22 v1.3
Min: 4 1/16"
(104mm)
Min: 4"
ø
(
103mm)
(109 ± 2mm)
4.30"
(109 ± 2mm)
Min: 5 3/4"
(146mm)
Min: 5 3/8"
ø
(
136mm)
1
S11844
S11844
S11844
3.19"
(81 ± 2mm)
3.19"
(81 ± 2mm)
5.12"
(Ø130 ± 2mm)
5.12"
(Ø130 ± 2mm)
S11845
S11845
S11845
4.30"
7.20"
(Ø183 ± 2mm)
7.20"
(Ø183 ± 2mm)
Satco Products, Inc.
Brentwood, NY 11717