Battery Replacement - Batavia BT-WB001 Manual De Usuario

English
4. Operation
See Fig. A.
a. In case of an emergency, turn the knob clockwise, this will cause the pin to
release.
b. The pin will break the car window immediately.
ATTENTION: Keep your eyes away from the glass when activating the trigger knob.
When the window breaker gets in contact with water the led will automatically start
blinking, guiding you to the window breaker.
Led signal (9) explanation:
4.1
a. Short flash every 2 minutes when the battery is OK.
b. Double flash if battery needs to be replaced.
c. Blinking when the window breaker gets in contact with water.

Battery replacement:

4.2
a. Remove battery cover (8).
b. Pull battery holder (6) out of the device.
c. Remove the old battery (7).
d. Insert the new battery (CR1632) with the negative side downwards inside the
battery holder (See Fig. C).
e. Push the battery holder (6) back inside.
f. Place the battery cover (8).
5. Replacing procedure
Remove / replace mounting set
5.1
When the mounting tape starts to come loose or two years after installation, we
recommend to reinstall the window breaker. When purchasing a new car, it is also
possible to remove the window breaker and install it in your new car.
6. Disposal
Do not dispose of electric power tools with domestic refuse.
Batteries
6.1
Think of the environment when disposing of batteries. Contact your local authori-
ties to find out where your nearest disposal area is. Do not dispose of batteries with
domestic refuse.
The product and the user manual may be subject to changes. Technical data may
be changed without prior notice.
6