Alarm Time Setting - TFA 60.2034. Serie Instrucciones De Uso

TFA_No. 60.2034_Anleitung 25.05.2022
Digital alarm clock and night light
8. Settings
• Press and hold the + or – button in the respective setting mode for quick setting.
• The device will automatically quit the setting mode if no button is pressed for 20 seconds. The device will auto-
matically use the settings you have made so far.
8.1 Setting of the time, date, night light timer and alarm volume
• Press and hold the SET button in normal mode to enter the setting mode.
• The first adjustable value flashes on the display.
• Use the + or – button to make the desired setting.
• Confirm with the SET button and go to the next setting.
• The sequence is shown as follows:
– Year, month, day
– Hours, minutes
– Night light AUTO OFF (default "nL" 15 minutes)
– Alarm volume (default "AL" 3)
• After all adjustments are completed, press the SET button to exit the setting mode.
8.1.1 Setting AUTO OFF function for the night light "nL"
• In the setting mode you can set the timer for the automatic off-function of the night light. Press the + or – but-
ton to set the desired time duration (5, 10, 15, 30, 45 or 60 minutes). After time has expired, the night light will
switch off automatically (see "Night light").
8.1.2 Alarm volume setting "AL"
• In setting mode, press the + or – button to adjust the alarm tone volume in 3 steps (step 1 = minimal volume).
13:59 Uhr Seite 15
– 28 –
Digital alarm clock and night light
9. Alarm clock function

9.1 Alarm time setting

• Press and hold the ALARM button in normal mode to enter the alarm setting mode.
• The hour digit and the alarm symbol 1 start flashing.
• Press the + or – button to set the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM button.
• ALARM 2 can be adjusted in the same way.
• Confirm the setting with the ALARM button.
9.2 Activate and deactivate the alarm
• When the alarm time is changed in alarm setting mode, the alarm is automatically activated and the correspon-
ding alarm symbol 1 and/or 2 appears.
• To activate or deactivate the alarm function in normal mode, press the ALARM button. The alarm symbols
appear or disappear on the display. The sequence is shown as follows: AL1 ON → AL2 ON → AL1+AL2
ON → AL1+AL2 OFF.
10. Wake-up process
• When the alarm is activated, the alarm starts to ring at the selected volume level when the set alarm time is
reached. The backlight turns on.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and it
will be reactivated at the same set time on the following day.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze function is activated. The snooze symbol
will appear on the display.
– 29 –