Hkoenig vio2 Manual De Instrucciones página 12

HOW TO SET THE MICROWAVE CONTROLS
 When the microwave is first plugged in, the display will show
 During the setting mode (except quick start cooking), the system will return to waiting
mode if there is not any operation within 28 seconds.
 During cooking, if press STOP/CANCEL pad once or open the door, the program will be
paused, then press START/QUICK START pad to resume, but if press STOP/CANCEL
pad twice, the program will be canceled.
 You do not need to press STOP/CANCEL pad, Microwave cooking, Auto cooking,
Weight defrost can be switched between each other.
 During quick start cooking and microwave cooking in process, you can turn
TIME/WEIGHT dial to increase or decrease cooking time.
 After ending cooking, the screen will display End with sound every two minutes until
user press STOP/CANCEL pad or open the door.
 Each time a button is touched, a beep will sound to acknowledge the touch.
1. SETTING DIGITAL CLOCK
With the microwave ready for input, touch the CLOCK button once or twice to set the digital
clock in 12 or 24 hours cycle.
For example: Suppose you want to set the microwave clock time to 8:30.
1. Press CLOCK button once or twice.
2. Turn TIME/WEIGHT to indicate the hour digit 8.
3. Press CLOCK button.
4. Turn TIME/WEIGHT dial to indicate the minute digits until the screen shows 8: 30.
5. Press CLOCK to confirm the setting.
Note: To check clock time during cooking, press the CLOCK button once.
2. QUICK START
This feature allows you to start the microwave quickly.
In standby mode, press the START/QUICK START button a number of times to set the cooking
time, the microwave starts work at full power level 2 seconds later. The maximum cooking time
can be set is 12 minutes.
3. MICROWAVE COOKING
For microwave cooking, just press POWER pad a numbers of time enter cooking power level
and then turn the TIME/WEIGHT knob enter cooking time. The longest cooking time is 60
minutes. The microwave will start to cook after START/QUICK START pad is pressed.
Select power level by pressing the POWER button:
and"1:01".