Publicidad
Idiomas disponibles
Idiomas disponibles
5. Cleaning and Maintenance
After operation for long time, the dust cumulated in the dust filter
or cooling pad may influence the inflow of air. Therefore it is
recommended to clean your fan regularly. Please follow the steps
below to clean your device.
Turn off the unit and unplug the power cord before cleaning and
maintenance.
1. Air Filter
To remove the air filter, first pull out the handle of air filter, remove it
from item. Use neutral cleaning agent and brush to clean the dust and
dirt on the filter. When finish please reinstall the air filter.
2. Cooling Pad
After removing the air filter you can see the cooling pad. Pull out the
cooling pad from inside. Use a clean or soft brush to remove dust
and dirt from the pad. Rinse with water if needed and leave it to dry in
open air. Never use any chemical cleaning solution that can harm pad.
When finish please reinstall the air filter.
3. Water Tank
Pull up the pump lift bar, pull out the water tank. Use soft cleaning
agents for cleaning. Wash with water and rinse. When finish please
reinstall the water tank.
4. Exterior Cleaning
Clean the exterior case of the fan with a soft damp cloth except control
panel. Never use hard cleaning agent that can harm the case. Make
sure the unit is dry before operating it.
WARNING: Never let water contact with the control panel.
Always clean it with a soft dry cloth.
9
Publicidad
