WOLFSTORM C15 Manual De Usuario página 16

There is "water flow" noise
inside the refrigerator
There are waterdrops around
the refrigerator casing or door
gap
The compressor is slightly
noisy when starting
Code F1 displayed
Code F2 displayed
1 6
• This is a normal occurrence, caused by the flow of refrigerant.
• This is normal, the moisture will condense to water when it touches a cold
surface of the refrigerator.
• This is normal, the noise will be reduced after the compressor works stably.
• Possible cause: low voltage to fridge.
Adjust the battery protection from High to Medium or from Medium to Low.
• Possible cause: condenser fan is overloaded. Disconnect power to fridge for 5
minutes & re-start.
If the code shows again, contact manufacturer for service.