Dab+ Radio; Dab+ Operation - Lenco SCD-720 Manual De Usuario

Adjusting the Antenna
The antenna at the rear panel of the unit should be fully extended to ensure a good DAB+ / FM reception. Alter the antenna
position for the best reception.

DAB+ OPERATION

The first time the DAB+ mode is selected, it ill automatically scan for available DAB+ stations. Wait until the scanning has
finished. The display ill sho the scanning progress. After scanning it ill tune to the first station.
The available stations in a certain reception band ill be sho n in the display. In case of eak reception, the station
may falter or give no sound. Try to move the receiver or rotate the antenna so that the eak DAB+ signal comes in
ithout faltering (station names are still sho n hen the signal is eak).
Auto Scan
1. Turn on the unit in DAB+ mode.
2. Press and hold the SCAN button (or press the SCAN button on the remote control) to start auto scanning the available
stations.
Manual Scan
By using the manual scan operation, it can help you to adjust the antenna or search station that is missed hile auto scanning.
1. Turn on the unit in DAB+ mode.
2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.
3. Press the or
4. Press the or
5. Press the ENTER button to confirm.
6. To select another channel (5A~13F), press the
7. When the station is found, press the ENTER button to select.
8. To quit manual scan, press the MENU button.
Tuning
After scanning all the available DAB stations, press the
the ENTER button to tune to this station within a few seconds.
Storing DAB+ Presets
You can save up to 20 DAB+ stations.
To use the unit buttons to store the preset:
1. Tune to the station you ish to store.
2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it ill save to that preset number.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button 4 . Store
4. Press the or
5. Press the ENTER to store.
To use the remote control button to store the preset:
1. Tune to the station you ish to store.
2. Press and hold the MEMORY button, Store
3. Press the or
4. Press the ENTER to store.
Recall Stored DAB+ Presets
To use the unit buttons to recall the preset:
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it ill tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button 4 . Recall
3. Press the or
4. Press the ENTER to recall.
To use the remote control button to recall the preset:
1. Press the MEMORY button, Recall
2. Press the or
3. Press the ENTER to recall.

DAB+ RADIO

button until Manual is displayed and then press the ENTER button.
button to select the desired channel (e.g. 12C 227.360MHz) (Selection bet een 5A and 13F).
button to select the desired preset number to store.
button to select the desired preset number to store.
button to select the desired preset number to recall.
ill be displayed.
button to select the desired preset number to recall.
or button and then press the ENTER button to confirm.
or button to display and navigate the station list. Then press
ill be displayed.
-10-
ill be displayed.
REPEAT RANDOM
VOL
DISPLAY
ill be displayed.
REPEAT RANDOM
VOL
DISPLAY