Audizio Salerno Manual De Instrucciones página 8

Manual Tune: select this option to select manually the DAB frequence.
DRC: select this option to choose between DRC low, DRC high and DRC off.
Prune: select this option to choose between PRUNE stations on or off.
DAB INFO
Repeatedly press INFO [Knob 11 on remote] to see the following informations: NAME / KBPS / DATE / TIME.
Rotate SOURCE [use Knob 5 on remote] to select FM mode. Select a station using one of the following methods:
AUTO: Long pressing [ ] or [
automatically until a station is found.
MANUAL: Repeatedly press [
want.
FM MENU
Press MENU/PROG [Knob 17 on remote] to access to the options.
Scan Setting: select this option to choose between scanning all stations or only the strong stations.
Audio Setting: select this option to choose between forcing mono audio or allowing stereo sound.
FM INFO
Repeatedly press INFO [Knob 11 on remote] to see the following informations: KIND OF PROGRAM / FREQUENCE / AUDIO /
DATE / TIME.
You can program a maximum of 20 preset radio stations.
When you are in DAB or FM modus, Press and hold PRESET [Knob 19 on remote] ''PRESET STORE'' will appear on display.
Press [ ] or [ ] or [knob 12/13 on remote] to select the preset number. Press ENTER [Knob 16 on remote] to confirm.
Press PRESET [Knob 19 on remote] to navigate through the presets.
Turn SOURCE [or use Knob 1 on remote] to select CD mode.
Press CD DOOR OPEN/CLOSE BUTTON [Knob 2 on remote] to open the cd door.
Place a cd inside the tray, then close the cd door. The first track will start playback.
Press [ ] or [ ] or [knob 12/13 on remote] to select your favorite tunes.
If you hold [ ] or [ ] or [knob 12/13 on remote], the playing track will go fast backward or forward until you release the
button.
Press PLAY/PAUSE [Knob 9 on remote] to pause the playback. The track number will start blinking.
Press PLAY/PAUSE [Knob 9 on remote] again to resume the play- back.
Press STOP [Knob 6 on remote] to stop the playback.
REPEAT MODE
During playback, repeatedly press REPEAT [Knob 7 on the remote control] to select:
• Repeat1
• RepeatFolder
• RepeatAll
CD PROGRAMMING
You can program up to 99 tracks to play in any desired order.
1. Insert a disc and press STOP [Knob 6 on remote] when it starts playing.
2. Press PROG [Knob 8 on remote]. "P01" will be shown on the display.
3. Press [ ] or [
4. Press PROG [Knob 8 on remote] to store the track in the program memory. "P02" will be shown on the display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE [Knob 9 on remote] to start program play.
7. Press STOP [Knob 6 on remote] once to stop the program play.
8. Press STOP [Knob 6 on remote] twice to clear program.
This unit provides an auxiliary audio input jack for connecting external audio device like MP3 players, CD players and allow
playback of your external source through the system speakers.
Use an audio cable (not included) with a RCA stereo plugs on one end of the cable.
Plug one end into the AUX-IN on the main unit and plug the other end of the cable into the LINE OUT or HEADPHONE Jack of
your external audio device.
Turn ON the unit and your external audio device. Rotate SOURCE [or use knob 5 on remote] to select CD mode.
Start to play the external device (see the user manual of the external device).
] or [knob 12/13 on remote] for 2 seconds or more, the frequency changes down or up
] or [ ] or [knob 12/13 on remote] to change the frequente until you find the station you
: The current track is played repeatedly.
: The current folder is played repeatedly.
: All tracks are played repeatedly.
] or [Knob 12/13 on remote], to select your favorite tunes.
8