equipment contains
a laser radiating laser rays according to the limit of laser
product of class 1.
SAFETY INSTRUCTIONS
1. READ INSTUCTIONS: All the safety and operation instructions should be read
before the appliance is operated.
2. RETAIN INSTRUCTIONS: The safety and operating instruction should be
retained for future reference.
3. HEED WARNINGS: All warnings on the appliance and in the operating
instructions should be adhered to.
4. FOLLOW AND MOISTURE: All operating instructions should be followed.
5. WATER AND MOISTURE: The appliance should not be used near water, for
example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or
in a wet basement.
6. VENTILATION: The appliance should be situated so that its location or position
does not interfere with its proper ventilation. Do not place on be sofa , rug or
similar surface that may block the ventilation openings, in a built-in installation,
such as a bookcase or cabinet that may impede the flow of air through the
ventilation openings.
7. HEAT: The appliance should be situated away from heat sources such as
radiators, stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCE: The appliance should be connected to power supply only of
the type described in the operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION: Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or against
them.
10. OBJECT AND LIQUID ENTRY: Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
11. ESD WARNING: The display does not function properly or no reaction to
operation of any the control may due to the electrostatic discharge. Switch off and
unplug the set. Reconnect after a few second.
12. DAMAGE REQUIRING SERVICE: The appliance should be serviced by
qualified service personnel when:
- The power-supply cord or plug has been damaged.
- The appliance has been exposed to rain.
- The appliance has been dropped, or the enclosure damaged.
- The appliance does not appear to operate normally.
13 SERVICING-The user should not attempt of service the appliance beyond that
described in the user operation instructions. All other servicing should be referred
to qualified service personnel.
Notes:
- Dirty or scratched CD may cause a skipping problem. Clear or replace the CD.
- If an error display or malfunctions occurs, disconnect the AC cord and remove all
the batteries. Then turn the power back on.
BEFORE OPERATION
Notes: CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage the appliance, care should be
taken of the followings items:
- Usable compact discs. Use only compact disc with the mark shown below.
- CD compact disc only with digital audio signals.