EN ZWLD-100 WATER LEAKAGE DETECTOR
EN ZWLD-100 WATER LEAKAGE DETECTOR
COMPATIBILITY
The water leakage detector works with the Smart Bridge and the
ICS-2000 to receive push notifications when water is detected.
NOTE: For receiving push notifications, a fully working internet
connection is required.
1. (RE)PLACE THE BATTERIES
A
Remove the battery cover
(backplate) by sliding it from
the water leakage detector.
B
Place 2x AAA batteries (not
included) in the detector.
Note the positive and
negative polarity in the
compartment. Close the
battery cover.
2. DOWNLOAD APP
To connect the detector with a
Smart Bridge or ICS-2000, first
get the App by scanning the QR
code or go to trust.com/zigbee
and install it.
4
3. CONNECT DETECTOR
A
In the App, select a room,
press the + button and choose
Trust Zigbee line/Water leakage
detector and follow the
instructions. For manual set up
of push-notifications go to the
rules tab, press the + button
and select notification wizard.
4. INDICATORS
The detector contains a LED
indicator to show the status of
the detector.