Safety Guidelines For Battery Chargers; Original Accessories/Auxiliary Equipment; Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PAAP 12 C3 Traducción Del Manual De Instrucciones Original

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
The charger is suitable for indoor use only.
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
ATTENTION!
► This charger can only charge the following
batteries: PAPK 12 A1/PAPK 12 A2/
PAPK 12 A3/PAPK 12 B1/PAPK 12 B3/
PAPK 12 C1/PAPK 12 D1.
► A current list of battery compatibility can be
found at www.lidl.de/akku.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and acces-
sories detailed in the operating instructions.
The use of tools and accessories other than
those recommended in the operating instruc-
tions could lead to an increased risk of personal
injury for you.
■ 8 │ GB │ IE

Before use

Removing/charging/inserting
the battery pack
NOTE
► The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without shorten-
ing its service life. Interrupting the charging
process does not damage the battery.
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level
is between 50% and 80%. The storage
climate should be cool and dry and the
ambient temperature should be between
0°C and 50°C.
CAUTION!
► Always unplug the appliance before you
remove the battery pack
it to the charger.
♦ To remove the battery pack
release button and pull the battery pack
out of the appliance.
♦ Insert the battery pack
charger .
♦ Insert the power plug into the socket. The
charge control LED
♦ The green charge control LED
charging is complete and the battery pack
is ready for use.
♦ Unplug the high-speed charger from the wall
socket.
♦ Push the battery pack
from or connect
, press the
into the high-speed
lights up red.
indicates that
into the appliance.
PAAP 12 C3