EN
PRODUCT INTRODUCTION
Baby Potty Seat with Ladder, made of PP material, bisphenol A
free not contained, non-toxic and odorless, sturdy and safe,
cultivates the baby's independent toilet habits.
PARTS LIST
Safety rail
1
Seat ring
2
Seat cushion
3
Nut
4
Pedal
5
Auxiliary pedal
6
Right foot support
7
Adjustable hole
8
9
Left foot support
10
Fender
Product assembly:
1.Insert the threaded joint head of the seat and pedal into the
connecting hole on the right supporting leg and screw it with
plastic nuts.
2.Insert the other side of threaded joint head of the seat and
pedal into the connecting hole on the left supporting leg and
screw it with plastic nuts. Use plastic key to tighten six plastic
nuts.
Usage:
Remove the adult toilet seat and place the child toilet seat directly
on the toilet with two foot supports on the floor.
10
Pedal adjustment:
Adjust the pedal height according to the user's age. Unscrew the
plastic nuts on both sides of the pedal with plastic keys, remove
the pedals and insert into the other four holes of the supporting
leg and twist the plastic nuts.
Installation of Seat Cushion
Put seat cushion on the seat ring and connect them with Velcro,
then press the seat cushion tight.
CAUTIONS:
1. The applicable age of this product is 2-7 years old.
2. Please properly collect plastic bag and small parts to avoid the
choking during children's play.
3. Keep away from fire.
4. The product must be placed on the toilet before using this
product, and make sure it is secure and reliable.
5. Before use, you must clean the oil on the ground, water and
other liquids and sundries, so as not to affect the anti-slip effect
of the pad.
6. Regularly check whether the plastic nut is loose and other
parts are damaged. Please replace the damaged parts if
necessary, and carefully refer to the instructions for operation.
7. The maximum weight capacity of this product: 50KG.
8. The product must be installed by an adult and be accompanied
by adult to ensure the safety of children.
11
EN